Guides to starting with the blade | Compute Blade Documentation

📄️ Power over Ethernet

The Compute Blade features support for PoE (802.3af), PoE+(802.3at), and PoE++(802.3bt).

The Compute Blade allows for the uses of 11 of the Compute Module's GPIO pins.

The blade has two digital LEDs mounted in series. A square yellow LED is located on the top of the board, and a green LED is located on the edge.

DIP Switch is ONLY populated on Dev model Compute Blades.

The Compute Blade has 1 M.2 M key slot for expansion. This slot can be used to for Storage, hardware accelerator, or even a GPU.

The compute module can only operate one USB port at a time. There is a switch to enable which port you would like to utilize.